Nov 16,2026
12V / 24V DC spur gear motor · 37 mm frame · baby cradle and bassinet swing
Direct answer. RG37 is a 37 mm DC spur gear motor that swings a baby cradle at 44–56 rpm with 4–5 kgf·cm of rated torque on 12V or 24V.



Key facts
| Attribute | RG37 |
| Motor type | DC spur gear motor, single-stage reduction |
| Gearbox / body | Ø37 mm gearbox, 33.1 mm body |
| Voltage | 12V DC, 24V DC |
| No-load speed | 55–75 rpm |
| Rated speed | 44–56 rpm |
| Rated torque | 4–5 kgf`cm (≈0.39–0.49 N`m) |
| No-load / rated current | ≤100–150 mA / ≤450–600 mA |
| Mounting | 6× M3 on 31 mm PCD, 3.5 mm max depth |
| Output shaft | Ø6 mm, 5.5 mm flat, 15.5 mm long |
| Rotation | CW / CCW |
| Typical use | Baby cradle, bassinet swing, slow-swing mechanism |
Which RG37 variant fits your cradle?
| Model | Voltage | No-load speed | Rated torque | Rated current | Rated speed |
| RG-37124500-60K | 12V DC | 75 ± 7.5 rpm | 4 kgf`cm | ≤600 mA | 50 ± 5 rpm |
| RG-37125000-90K | 12V DC | 55 ± 5 rpm | 4 kgf`cm | ≤600 mA | 44 ± 4 rpm |
| RG-37246000-60K | 12V DC | 55 ± 5 rpm | 4 kgf`cm | ≤600 mA | 44 ± 4 rpm |
| RG-37246700-90K | 24V DC | 75 ± 7.5 rpm | 5 kgf`cm | ≤450 mA | 56 ± 5.6 rpm |
Shaft and connector variants follow the drawing number — confirm before ordering.
When does the RG37 fit?
RG37 suits cradles needing 44–56 rpm and up to 5 kgf·cm at 12V or 24V; above 5 kgf·cm, specify a larger frame.
Is GR37 the same as RG37?
Yes — GR37 is a common transposition of the code for this 37 mm DC spur gear motor; both point to the same drawing set.
Buyer questions
How much torque does a cradle need? Start from bassinet weight and swing arm length, then add margin; RG37 is rated 4–5 kgf·cm and a torque–speed curve at your voltage is available on request.
How much current will it draw? ≤100–150 mA at no load and ≤450–600 mA at rated load, which sets both the battery pack and the overload test margin.